Toyota Highlander Service Manual: Key inter lock solenoid (ATM)
Toyota Highlander Service Manual / Automatic transmission / trans / Key inter lock solenoid (ATM)
INSPECTION
1. INSPECT KEY INTER LOCK SOLENOID
(a) Disconnect the solenoid connector.
(b) Connect KLS+ (4) terminal to the batteries' positive (+) terminal, and KLS- (3) terminal to the battery negative (-) terminal, and apply about 12V between KLS+ - KLS- terminals.
(c) Check that operation noise can be heard from the solenoid.
If the solenoid does not operate, replace the solenoid.
Adjustment
1. INSPECT SHIFT LEVER POSITION
(a) When shifting the shift lever to each position, make sure
that it moves smoothly, can be moderately operated and
the position indicator displays correctly.
...
Transmission control cable ASSY (ATM)
REPLACEMENT
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER (SEE PAGE 71-10 )
2. REMOVE FLOOR CARPET COVER CENTER RH (SEE PAGE 71-10 )
3. REMOVE FLOOR CARPET COVER CENTER LH (SEE PAGE 71-10 ) ...
More about Toyota Highlander:
On-vehicle inspection
1. INSPECT AIR-FUEL RATIO COMPENSATION SYSTEM
(a) Measure the voltage between the terminals of the ECM
connectors.
Standard:
NOTICE:
Connect test leads to the connector's backside. The connectors
should not be disconnected from the ECM.
HINT:
Voltage between the terminals of the EC ...
В© 2011-2026 Copyright www.tohighlander.com
