Toyota Highlander Service Manual: Ventilation valve Sub-ASSY (2AZ-FE)

Toyota Highlander Service Manual / Emission control / Charcoal canister ASSY (2AZ-FE) / Ventilation valve Sub-ASSY (2AZ-FE)

REPLACEMENT

1. REMOVE VENTILATION VALVE SUB-ASSY

(a) Disconnect the ventilation hose from the ventilation valve.

(b) Remove the ventilation valve.

2. INSTALL VENTILATION VALVE SUB-ASSY

(a) Install the ventilation valve.

INSTALL VENTILATION VALVE SUB-ASSY

Apply adhesive to 2 or 3 threads.
Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent
Install the ventilation valve.
Torque: 19 NVm (193 kgfVcm, 14 ftVlbf)

(b) Connect the ventilation hose to the ventilation valve.

Charcoal canister ASSY (2AZ-FE)

REPLACEMENT 1. REMOVE EXHAUST PIPE ASSY CENTER (a) Remove the 4 bolts and 2 compression springs. (b) Remove the exhaust pipe center from the 4 exhaust pipe supports. (c) Remove the 2 gaskets from ...

Emission control system (3MZ-FE)

...

More about Toyota Highlander:

Rear suspension arm ASSY NO.1 LH (FF)
REPLACEMENT HINT: COMPONENTS: See page 27-2 . 1. REMOVE REAR WHEEL 2. REMOVE STABILIZER BAR REAR (SEE PAGE 27-27 ) 3. REMOVE REAR SUSPENSION ARM ASSY NO.1 LH (a) Support the rear axle carrier with a jack. (b) Remove the bolt and disconnect the rear suspension arm assy No.1 (inner side). ...