Toyota Highlander Service Manual: Steering pad switch LH
REPLACEMENT
HINT:
- COMPONENTS: See page 67-2
- Installation is in the reverse order of removal.
1. PRECAUTION (SEE PAGE 60-1 )
2. SEPARATE BATTERY NEGATIVE TERMINAL (SEE PAGE 60-1 )
3. REMOVE STEERING WHEEL COVER LOWER NO.2 (SEE PAGE 50-8 )
4. REMOVE STEERING WHEEL COVER LOWER NO.3 (SEE PAGE 50-8 )
5. REMOVE HORN BUTTON ASSY (SEE PAGE 50-8 )
6. REMOVE STEERING PAD SWITCH LH
(a) Disconnect the connector.
(b) Disconnect the connector of cruise control main switch.
(c) Remove the screw.
(d) Release the 2 pin fittings and remove the steering pad switch LH.
7. INSTALL HORN BUTTON ASSY (SEE PAGE 60-1 1)
8. CONNECT BATTERY NEGATIVE TERMINAL
9. INSPECT HORN BUTTON ASSY (SEE PAGE 50-8 )
10. INSPECT SRS WARNING LIGHT (SEE PAGE 05-1207 )
Video(video adapter) terminal
REPLACEMENT
HINT:
COMPONENTS: See page 67-2
Installation is in the reverse order of removal.
1. REMOVE VIDEO(VIDEO ADAPTER) TERMINAL
(a) Remove the video (video adapter) terminal togeth ...
Cigarette lighter ASSY
REPLACEMENT
HINT:
COMPONENTS: See page 67-2
Installation is in the reverse order of removal.
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER (SEE PAGE 71-10 )
2. REMOVE CIGARETTE LIGH ...
More about Toyota Highlander:
High beam automatic turning on or off conditions
When all of the following conditions are met, the high beam will be
automatically turned on (after approximately 1 second):
vehicle speed is above approximately 21 mph (34 km/h).
The area ahead of the vehicle is dark.
There are no oncoming or preceding vehicles with headli ...
