REPLACEMENT
HINT:
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER (SEE PAGE 71-10 )
2. REMOVE CIGARETTE LIGHTER ASSY
(a) Remove the cigarette lighter cover.
(b) Disengage the meshing of the cigarette lighter and the cigarette lighter indicator lens by rotating the cigarette lighter assy.
(c) Pull out the cigarette lighter assy.
3. INSTALL CIGARETTE LIGHTER ASSY
(a) Aligning the socket with the cutout of the socket cover, fully push it to install.
On-vehicle inspection
HINT:
The cooling fan may rotate when the ignition switch is turned from ACC to ON.
This is normal.
1. CHECK COOLING FAN OPERATION WITH LOW TEMPERATURE (Below 83 C (181 F))
(a) Turn the ignition switch ON.
(b) Check that the cooling fan stops.
If not, check the cooling fan relay and ECT sen ...