Toyota Highlander Owners Manual: Drive information

Toyota Highlander Owners Manual / Instrument cluster / Multi-information display (with color display) / Drive information

Current fuel consumption*1 displays the current rate of fuel consumption
average fuel economy (after reset*2/after start/after refuel)*1 displays the average fuel economy since the function was reset, the engine was started, and the vehicle was refueled, respectively use the displayed average fuel economy as a reference.
Average vehicle speed (after reset*2/after start)*1 displays the average vehicle speed since the function was reset and the engine was started, respectively
elapsed time (after reset*2/after start)*1 displays the elapsed time since the function was reset and the engine was started, respectively
distance (driving range/after start/after reset*2)*1 displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the engine was started, respectively.

this distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
when only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.

Eco driving indicator
Awd control (if equipped)

Displays the torque distribution between the front and rear axles of the awd control system *1: can be registered to drive information 1 through 3. *2: Resetting procedures:

select a function to be reset using the meter control switches and then press and hold to reset.
if there is more than one function that can be reset, check boxes will be displayed next to those functions.

Display contents

Drive information Select to display various drive data. Navigation systemlinked display (if equipped) Select to display the following navigation system-linked information. Route guidan ...

Settings display

Changing the settings Select using the meter control switches. Select an item and then set it with the center button. Customizable items Language select to change the language on th ...

More about Toyota Highlander:

Inspection
1. INSPECT INTAKE AIR CONTROL VALVE ASSY NO.2 (a) Apply 26.7 kPa (200 mmHg, 7.9 in.Hg) of vacuum to the actuator. Check if the actuator rod pulls the lever and causes the valve to rotate open, as shown in the illustration. (b) One minute after applying the vacuum, check that the actuator ro ...