REPLACEMENT
HINT:
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER (SEE PAGE 71-10 )
2. REMOVE FRONT SEAT ARMREST ASSY CENTER (SEE PAGE 71-10 )
3. REMOVE CONSOLE BOX ASSY (SEE PAGE 71-10 )
4. REMOVE VOLTAGE INVERTER ASSY

(a) Disconnect the connector.
(b) Remove the 2 clamps and the voltage inverter assy.
Network gateway ECU
Multi-display controller sub-ASSYInspection
1. INSPECT MASS AIR FLOW METER
(a) Check the output voltage.
Apply battery voltage across terminals 1 (+B) and 2
(E2G).
Connect the positive (+) tester probe to terminal 3
(VG), and negative (-) tester probe to terminal 2
(E2G).
Blow air into the Mass Air Flow (M ...