Toyota Highlander Service Manual: Cylinder head ASSY (3MZ-FE)
COMPONENTS

REPLACEMENT
1. REMOVE AUTOMATIC TRANSAXLE ASSY (2WD TYPE) (See page 40-20 )
2. REMOVE AUTOMATIC TRANSAXLE W/TRANSFER (4WD TYPE) (See page 40-20 )
3. REMOVE DRIVE PLATE & RING GEAR SUB-ASSY
...
1. REMOVE W/HEAD STRAIGHT SCREW PLUG NO.1 (RH CYLINDER)
(a) Using a straight hexagon wrench 14, remove the 2 screw plugs.
2. REMOVE W/HEAD STRAIGHT SCREW PLUG NO.2 (LH CYLINDER)
(a) Using a straigh ...
More about Toyota Highlander:
Inspection
1. INSPECT WATER PUMP ASSY
(a) Visually check the drain hole for coolant leakage.
(b) Turn the pulley, and check that the water pump bearing
moves smoothly and noiselessly.
If the bearing moves roughly or noisily, replace the water pump
assy.
(c) Visually check the air holes for coolan ...
В© 2011-2026 Copyright www.tohighlander.com