Toyota Highlander Service Manual: Cooling fan system (3MZ-FE)

Inspection

1. INSPECT THERMOSTAT HINT: The valve opening temperature is stamped on the thermostat. (a) Immerse the thermostat in water and gradually heat the water. (b) Check the valve opening tempe ...

On-vehicle inspection

HINT: The cooling fan may rotate when the ignition switch is turned from ACC to ON. This is normal. 1. CHECK COOLING FAN OPERATION AT LOW TEMPERATURE (Below 83 C (181 F)) (a) Turn the ignition sw ...

More about Toyota Highlander:

Overhaul
1. REMOVE GENERATOR PULLEY SST 09820-63010 (09820-06010, 09820-06020) HINT: (a) Hold SST (1-A) with a torque wrench, and tighten SST (1-B) clockwise to the specified torque. Torque: 39 NVm (400 kgfVcm, 29 ftVlbf) NOTICE: Check that SST is secured to the rotor shaft. (b) Mount S ...