REPLACEMENT
HINT: Installation is in the reverse order of removal.
1. REMOVE BACK WINDOW PANEL TRIM UPPER (SEE PAGE 75-20 )
2. REMOVE CENTER STOP LAMP SOCKET & WIRE
(a) Disconnect the connector, and remove the center stop lamp socket & wire.
3. REMOVE CENTER STOP LAMP ASSY
(a) Remove the 2 screws.
(b) Disengage the 4 claws, and remove the center stop lamp assy.
4. REMOVE CENTER STOP LAMP GASKET
5. INSTALL CENTER STOP LAMP ASSY
(a) Remove adhesive tape from the body.
(b) Wipe off stains with a cleaner.
(c) Install the center stop lamp assy with the 2 screws.
Moon roof
Use the overhead switches to open and close the moon roof and
tilt it up and down.
Opening and closing
Opens the moon roof*
the moon roof stops slightly
before the fully open position to
reduce wind noise.
Press the switch again to fully
open the moon roof.
Closes the moon roof*
...