Toyota Highlander Service Manual: Speed sensor (U241E/U140F)
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE SPEED SENSOR (NT SENSOR)
(a) Disconnect the connector.
(b) Remove the bolt and speed sensor.
5. REMOVE SPEED SENSOR (NC SENSOR)
(a) Disconnect the connector.
(b) Remove the bolt and speed sensor.
6. INSTALL SPEED SENSOR (NC SENSOR)
(a) Coat O-ring with ATF.
(b) Install the speed sensor with the bolt.
Torque: 11.3 NVm (115 kgfVcm, 8 ftVlbf)
HINT: Make sure of the manufacturer's name.
(c) Connect the connector.
7. INSTALL SPEED SENSOR (NT SENSOR)
(a) Coat O-ring with ATF.
(b) Install the speed sensor with the bolt.
Torque: 11.3 NVm (115 kgfVcm, 8 ftVlbf)
HINT: Make sure of the manufacturer's name.
(c) Connect the connector.
8. INSTALL AIR CLEANER ASSY
Torque: 5.0 NVm (51 kgfVcm, 44 in.Vlbf)
Torque converter clutch and drive plate (ATM)
INSPECTION
1. INSPECT TORQUE CONVERTER CLUTCH ASSY
(a) Inspect the one-way clutch.
Install SST into the inner race of the one- way
clutch.
SST 09350-32014 (09351-32010)
...
Speed sensor (U151E/U151F)
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE SPEED SENSOR (NT SENSOR)
(a) Disconnect the speed sensor connector.
(b) Remove the bolt and ...
More about Toyota Highlander:
Inspection
1. INSPECT INTAKE AIR CONTROL VALVE ASSY NO.2
(a) Apply 26.7 kPa (200 mmHg, 7.9 in.Hg) of vacuum to the
actuator. Check if the actuator rod pulls the lever and
causes the valve to rotate open, as shown in the illustration.
(b) One minute after applying the vacuum, check that the actuator
ro ...
