Toyota Highlander Service Manual: Rear speaker ASSY
REPLACEMENT
HINT:
- COMPONENTS: See page 75-13
- Installation is in the reverse order of removal.
1. REMOVE DOOR PULL HANDLE (SEE PAGE 75-13 )
2. REMOVE REAR DOOR TRIM BOARD SUB-ASSY LH (SEE PAGE 75-13 )
3. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSY LH (SEE PAGE 75-13 )
4. REMOVE REAR DOOR SERVICE HOLE COVER LH (SEE PAGE 75-13 )
5. REMOVE REAR SPEAKER ASSY
(a) Disconnect the connector.
(b) Remove the 3 screws and rear speaker assy.
6. INSTALL REAR SPEAKER ASSY
(a) Install the rear speaker assy with the 3 screws.
(b) Connect the connector.
Front NO.2 speaker ASSY
REPLACEMENT
HINT:
COMPONENTS: See page 67-2
Installation is in the reverse order of removal.
1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSY (SEE PAGE 75-6 )
2. REMOVE FRONT DOOR LOWER FRAME ...
Antenna cord sub-ASSY NO.2
REPLACEMENT
HINT:
COMPONENTS: See page 67-2
Installation is in the reverse order of removal.
1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY W/PASSENGER AIR BAG ASSY
(SEE PAGE 71-10 )
HINT: ...
More about Toyota Highlander:
High beam automatic turning on or off conditions
When all of the following conditions are met, the high beam will be
automatically turned on (after approximately 1 second):
vehicle speed is above approximately 21 mph (34 km/h).
The area ahead of the vehicle is dark.
There are no oncoming or preceding vehicles with headli ...
