REPLACEMENT
HINT:
1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSY (SEE PAGE 75-6 )
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH (SEE PAGE 75-6 )
3. REMOVE DOOR PULL HANDLE (SEE PAGE 75-6 )
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH (SEE PAGE 75-6 )
5. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSY LH (SEE PAGE 75-6 )
6. REMOVE FRONT NO.2 SPEAKER ASSY
(a) Disconnect the connector.
(b) Remove the screw and front No. 2 speaker assy.
Starting system (2AZ-FE)
INSPECTION
1. INSPECT STARTER ASSY
NOTICE:
These tests must be performed within 3 to 5 seconds to
avoid burning out the coil.
(a) Do the pull-in test.
Disconnect the lead wire from terminal C.
Connect the battery to the magnetic switch as
shown in the illustration on the ...