1. INSPECT FINS BLOCKAGE

(a) If the fins are clogged, wash them with water or a steam cleaner. Dry with compressed air.
NOTICE: If the distance between the steam cleaner and the core is too close, the fins may become damaged.
Keep the following injection distance.
Standard:

ComponentsRoof drip side finish moulding center LH
REPLACEMENT
HINT:
The installation is in the reverse order of the removal. However,
when there is a special point concerning
the installation, it is indicated.
On the RH side, use the same procedures as on the LH side.
1. REMOVE ROOF DRIP SIDE FINISH MOULDING CENTER LH
(a) Cover ...