Toyota Highlander Service Manual: Exhaust
COMPONENTS
OVERHAUL
1. REMOVE CYLINDER BLOCK WATER DRAIN COCK SUB-ASSY
2. REMOVE WATER SEAL PLATE
3. REMOVE CYLINDER BLOCK W/HEAD STRAIGHT SCREW NO.1 PLUG
(a) Using a socket hexagon wrench 10 ...
COMPONENTS
REPLACEMENT
NOTICE:
Check if an old gasket remains on the pipe. If remains, remove it. Check if any
bolts or nuts are rusted.
If rusted, replace them.
1. REMOVE EXHAUST PIPE ASSY ...
More about Toyota Highlander:
Accelerator pedal rod ASSY (3MZ-FE)
REPLACEMENT
1. REMOVE ACCELERATOR PEDAL ROD ASSY
(a) Disconnect the accelerator pedal position sensor connector.
(b) Remove the 2 bolts and pedal rod.
2. INSTALL ACCELERATOR PEDAL ROD ASSY
(a) Install the pedal rod with the 2 bolts.
Torque: 4.9 NVm (50 kgfVcm, 43 in.Vlbf)
(b) Connect th ...
В© 2011-2025 Copyright www.tohighlander.com