Toyota Highlander Service Manual: Disposal
1. DISPOSE OF BACK DOOR STAY ASSY LH
(a) Horizontally fix the stay in a vise with the piston-rod pulled out.
(b) Wearing safety glasses, gradually cut a part between A and B (shown in the illustration) using a metal saw to gradually release the gas.
Specification:
CAUTION: Be careful to cover the area that is being cut as there is a possibility that metal debris could be blown out by the gas (the gas is colorless, odorless and harmless).
Replacement
HINT:
The installation procedures are the removal procedures in reverse
order. However, only installation
procedures requiring addition information are included.
Use the same procedures for ...
More about Toyota Highlander:
Crankshaft position sensor (2AZ-FE)
REPLACEMENT
HINT:
A bolt without a torque specification is shown in the standard bolt chart (see
page 03-2 ).
1. REMOVE ENGINE UNDER COVER NO.1
(a) Remove the 6 screws, 2 clips and under cover
2. REMOVE FRONT FENDER APRON SEAL RH
(a) Remove the clip, 2 bolts and apron seal.
3. REMOV ...
