Toyota Highlander Service Manual: Precaution
1. HANDLING PRECAUTIONS FOR STEERING SYSTEM
(a) Care must be taken when replacing parts. Incorrect replacement may affect the performance of the steering system and result in a driving hazard.
2. HANDLING PRECAUTIONS FOR SRS AIRBAG SYSTEM
(a) The HIGH LANDER is equipped with SRS (Supplemental Restraint System) such as the driver airbag and front passenger airbag. Failure to carry out service operation in the correct sequence could cause the SRS to unexpectedly deploy during servicing, possibly leading to a serious accident. Before servicing (including removal or installation of parts, inspection or replacement), be sure to read the precautionary notice for the supplemental restraint system (see page 60-1 ).
Steering system
...
Problem symptoms table
Use the table below to help you find the cause of the problem. The numbers
indicate the priority of the likely
cause of the problem. Check each part in the order shown. If necessary, repair
or re ...
More about Toyota Highlander:
Rear axle hub & bearing ASSY LH (4WD)
REPLACEMENT
HINT:
COMPONENTS: SEE PAGE 30-4
1. REMOVE REAR WHEEL
2. SEPARATE SPEED SENSOR REAR LH
3. REMOVE REAR AXLE SHAFT LH NUT
(a) Using SST and a hammer, unstake the staked part of the
axle hub LH nut.
SST 09930-00010
NOTICE:
Loosen the staked part of the nut completely, otherwise ...
