1. INSPECT FINS BLOCKAGE
If the fins are clogged, wash them with water or a steam cleaner.
Dry with compressed air.
NOTICE: If the distance between the steam cleaner and the core is too close, the fins may become damaged.
Keep the following injection distance.
Standard:
Speed sensor (U241E/U140F)
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE SPEED SENSOR (NT SENSOR)
(a) Disconnect the connector.
(b) Remove the bolt and speed sensor.
5. REMOVE SPEED SENSOR (NC SENSOR)
(a) Disconnect the connector.
(b) Remove the bolt and sp ...