Toyota Highlander Owners Manual: Initialization

Toyota Highlander Owners Manual / Vehicle specifications / Initialization

The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle:

Item	When to initialize
Power back door*	After reconnecting or changing the battery After changing a fus
Maintenance data (u.S.A. Only)	After the maintenance is performed
Tire pressure warning system	When changing the tire inflation pressure by changing traveling speed or load weight, etc.

*: If equipped

Customization

Your vehicle includes a variety of electronic features that can be personalized to your preferences. The settings of these features can be changed by the meter control switches, on the audio system ...

For owners

...

More about Toyota Highlander:

Rear axle carrier sub-ASSY LH (FF)
REPLACEMENT HINT: COMPONENTS: SEE PAGE 30-4 Replace the RH side by the same procedures with the LH side. 1. REMOVE REAR WHEEL 2. SEPARATE REAR DISC BRAKE CALIPER ASSY LH 3. REMOVE REAR DISC (SEE PAGE 32-29 ) 4. DISCONNECT SKID CONTROL SENSOR (a) Disconnect the connector. 5. REMOVE REAR AXLE ...