REPLACEMENT
HINT:
1. REMOVE FR WIPER BLADE LH
(a) Remove the front wiper blade LH from the front wiper arm LH.
NOTICE: Do not fold down the front wiper arm with the front wiper blade removed from it.
2. REMOVE WIPER RUBBER LH
(a) Remove the front wiper rubber LH from the front wiper blade.
(b) Remove the 2 wiper rubber backing plates from the wiper rubber LH.
3. INSTALL WIPER RUBBER LH
(a) Install the 2 wiper rubber backing plates to the wiper rubber LH.
NOTICE: Install the backing plates in the correct direction.
(b) Install the wiper rubber LH so that the head part (larger side) of the wiper rubber faces the arm axle side.
NOTICE: Push the front wiper blade into the grooves of the wiper rubber to engage them completely.
On-vehicle inspection
1. CONNECT HAND-HELD TESTER:
(a) Connect the hand-held tester to the DLC3.
(b) Start the engine and run at idle.
(c) Select the ACTIVE TEST mode on the hand-held tester.
HINT: Please refer to the hand-held tester operator's manual for
further
details.
2. INSPECT ACTUATOR MOTOR OPERATION
...