REPLACEMENT
1. PRECAUTION (SEE PAGE 60-1 )
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE HORN BUTTON ASSY (SEE PAGE 60-17 )
5. REMOVE STEERING WHEEL ASSY (SEE PAGE 50-8 )
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)
6. REMOVE STEERING COLUMN COVER UPR (SEE PAGE 50-8 )
7. REMOVE SPIRAL CABLE SUB-ASSY (SEE PAGE 60-26 )
8. REMOVE STEERING SENSOR
(a) Release 6 claw fittings and remove the steering sensor from the spiral cable.
9. INSTALL STEERING SENSOR
(a) Install the steering sensor to the spiral cable.
NOTICE:
10. ADJUST CENTER FRONT WHEEL
11. INSTALL SPIRAL CABLE SUB-ASSY (SEE PAGE 60-26 )
12. CENTER SPIRAL CABLE (SEE PAGE 60-26 )
13. INSTALL STEERING WHEEL ASSY (SEE PAGE 50-8 )
14. INSTALL HORN BUTTON ASSY (SEE PAGE 60-17 )
15. INSPECT STEERING WHEEL CENTER POINT
16. INSPECT HORN BUTTON ASSY (SEE PAGE 60-1 1)
17. CONNECT BATTERY NEGATIVE TERMINAL
18. INSPECT SRS WARNING LIGHT (SEE PAGE 05-1207 )
Shifting the shift lever
Vehicles without a
smart key system:
while the engine switch is in the “on” position, depress the
brake pedal and move the shift lever.
When shifting the shift lever between p and d, make sure that the
vehicle is completely stopped.
Vehicles with a smart key system:
while the eng ...