INSPECTION
1. INSPECT STARTER ASSY
NOTICE: These tests must be performed within 3 to 5 seconds to avoid burning out the coil.
(a) Do the pull-in test.
If the clutch pinion gear does not move, replace the magnetic switch assy.
(b) Do the hold-in test.
Check that the pinion gear remains extended.
If the clutch pinion gear returns inward, replace the magnetic switch assy.
(c) Check the clutch pinion gear return.
If the clutch pinion gear does not return, replace the magnetic switch assy.
(d) Do the no-load performance test.
Torque: 10 NVm (102 kgfVcm, 7 ftVlbf)
Specified current: 90 A or less at 11.5 V
2. INSPECT RELAY (Marking: STARTER)
(a) Check the resistance of the STARTER relay.
Standard:
If the result is not as specified, replace the relay.
Contact/call history
settings
The contact can be transferred from a bluetooth® phone to the system.
The contact also can be added, edited and deleted.
The call history can be deleted and contact and favorites can be
changed.
Display the "phone/message settings" screen.
Select "contact/call history s ...