Toyota Highlander Service Manual: Replacement
HINT:
- The installation procedures are the removal procedures in reverse order.
- EC mirror stands for electrochromic mirror.
1. w/o EC mirror: REMOVE INNER REAR VIEW MIRROR ASSY
(a) Push the cover in the direction indicated by the arrows (a) and remove it.
(b) While holding down the claw in the direction of the block arrow (b), slide the inner rear view mirror assy in the direction of the while arrow (c) and remove it.
2. w/ EC mirror: REMOVE INNER REAR VIEW MIRROR ASSY
(a) Remove the mirror cover.
(b) Disconnect the connector.
(c) Using a torx socket wrench (T20), remove the screw.
(d) Slide the mirror in the direction indicated by the arrow in the illustration, and remove the mirror.
3. w/ EC mirror and compass: REMOVE INNER REAR VIEW MIRROR ASSY
(a) Remove the mirror cover.
(b) Disconnect the connector.
(c) Using a torx socket wrench (T20), remove the screw.
(d) Slide the mirror in the direction indicated by the arrow in the illustration, and remove the mirror.
Pre-check
1. SELECT COMPASS DISPLAY MODE
(a) The COMP switch allows you to select the "Display" or "Non-display" mode
of the compass.
2. SET ZONE
(a) The location of magnetic north and true north differs d ...
More about Toyota Highlander:
Body
ON-VEHICLE INSPECTION
1. Canada:
TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
(a) Where necessary, tighten all the parts of the chassis.
Front axle and suspension
Drive train
Rear axle and suspension
Brake system
Engine mounting, etc.
(b) Where necessary, tighten all the parts of the ...
