Toyota Highlander manuals

Toyota Highlander Service Manual: Replacement

NOTICE: Before changing the starter, check the following again:

1. REMOVE BATTERY

2. REMOVE BATTERY TRAY

3. REMOVE STARTER ASSY

REMOVE STARTER ASSY


(a) Disconnect the starter connector.

(b) Open the terminal cap, remove the nut and disconnect the starter wire.

REMOVE STARTER ASSY


(c) Remove the 2 bolts and starter.

4. INSTALL STARTER ASSY

(a) Install the starter with the 2 bolts.

Torque: 37 NVm (377 kgfVcm, 27 ftVlbf)

INSTALL STARTER ASSY


(b) Install the terminal nut and cover the nut with the cap.

Torque: 9.8 NVm (100 kgfVcm, 7 ftVlbf) (c) Connect the starter wire.

5. INSTALL BATTERY TRAY

6. INSTALL BATTERY

(a) Install the battery clamp with the bolt and nut.

Torque: 5.5 NVm (56 kgfVcm, 49 in.Vlbf) (b) Connect the cables to the battery terminals.

Torque: 3.5 NVm (36 kgfVcm, 31 in.Vlbf)

Starter ASSY (3MZ-FE)
COMPONENTS ...

Overhaul
1. REMOVE MAGNETIC SWITCH ASSY (a) Remove the nut and disconnect the lead wire from the magnetic switch. (b) Remove the 2 screws holding the magnetic switch to the starter drive housing. ...

More about Toyota Highlander:

Supplemental restraint system
PREPARATION SST Recomended Tools Torx is a registered trademark of Textron Inc. Equipment ...

В© 2011-2024 Copyright www.tohighlander.com