REPLACEMENT
HINT:
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER (SEE PAGE 71-10 )
2. REMOVE INTEGRATION CONTROL & PANEL ASSY
(a) Remove the 6 bolts.
(b) Disconnect the connectors and remove the integration control & panel assy.
3. REMOVE RADIO BRACKET NO.1 (W/O EMV & NAVIGATION SYSTEM)
(a) Remove the 4 bolts, 2 screws and radio bracket No. 1.
4. REMOVE MULTI-DISPLA Y CONTROLER BRACKET A (W/ EMV & NAVIGATION SYSTEM)
(a) Remove the 7 screws and multi-display controller bracket A.
5. REMOVE RADIO BRACKET NO.2 (W/O EMV & NAVIGATION SYSTEM)
(a) Remove the 4 bolts, 2 screws and radio bracket No. 2.
6. REMOVE MULTI-DISPLA Y CONTROLER BRACKET B (W/ EMV & NAVIGATION SYSTEM)
(a) Remove the 7 screws and multi-display controller bracket B.
7. REMOVE RADIO RECEIVER ASSY
Positioning a floor jack
When using a floor jack, follow the instructions in the manual
provided with the jack and perform the operation safely.
When raising your vehicle with a floor jack, position the jack correctly.
Improper placement may damage your vehicle or cause
injury.
Front
Rear
...