Toyota Highlander Service Manual: Overhaul
HINT: COMPONENTS: SHIFT LEVER ASSY (See page 40-61 )
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER (SEE PAGE71-10 )
2. REMOVE FLOOR CARPET COVER CENTER RH (SEE PAGE71-10 )
3. REMOVE FLOOR CARPET COVER CENTER LH (SEE PAGE71-10 )
4. REMOVE CONSOLE BOX ASSY (SEE PAGE71-10 )
5. DISCONNECT TRANSMISSION CONTROL CABLE ASSY
(a) Disconnect the floor shift transmission control cable assy end from the floor shift assy.
6. REMOVE FLOOR SHIFT ASSY
(a) Disconnect the 3 connectors.
(b) Remove the 4 nuts and dismount the floor shift assy from the vehicle.
7. REMOVE SHIFT LEVER KNOB SUB-ASSY
(a) Releasing the lock by pressing the click, disconnect the indicator lamp wire connector from the shift lever plate.
(b) Using a screwdriver, release the stopper of the connector.
(c) Using a small screwdriver, disengage the locking lug of the terminals 2 and 6, and pull the terminals out from the rear.
(d) Disconnect the 2 wire harnesses of the transmission control switch from the clamp.
(e) Lower the shift lever knob cover.
(f) Remove the 2 screws and shift lever knob from the shift lever.
8. REMOVE FLOOR SHIFT SHIFT LEVER KNOB COVER
(a) Remove the shift lever knob cover from the shift lever.
9. REMOVE SHIFT LEVER KNOB BUTTON
(a) Using a screwdriver, release the claw and remove the shift lever knob button and spring from the shift lever knob.
10. REMOVE TRANSMISSION CONTROL SWITCH
(a) Remove the screw from the shift lever knob, detach the transmission control switch together with the shift lever knob cover No.1.
(b) Using a screwdriver, release the 2 claws and remove the transmission control switch from the shift lever knob cover No.1.
11. REMOVE INDICATOR LAMP WIRE SUB-ASSY
(a) Using a screwdriver, release the stopper of the connector.
(b) Using a small screwdriver, disengage the locking lug of the terminals 3 and 7, and pull the terminals out from the rear.
(c) Remove the indicator lamp wire from the position indicator housing lower.
(d) Remove the indicator lamp cap and indicator lamp bulb from the indicator lamp wire.
12. REMOVE SHIFT LOCK RELEASE BUTTON COVER
(a) Using a small screwdriver, remove the shift lock release cover from the control position indicator plate.
13. REMOVE CONTROL POSITION INDICATOR PLATE
(a) Using a screwdriver, release the 4 claws and remove the control position indicator plate from the position indicator housing lower.
14. REMOVE POSITION INDICATOR HOUSING LOWER
(a) Remove the 4 screws, detach the position indicator housing lower from the shift lever plate.
15. REMOVE SHIFT LOCK RELEASE BUTTON
(a) While pressing the 2 claws, remove the shift lock release button and spring from the position indicator housing lower.
16. REMOVE PATTERN SELECT SWITCH ASSY NO.1
(a) Using a screwdriver, release the 4 claws and remove the pattern select switch assy No.1 from the position indicator housing lower.
17. REMOVE POSITION INDICATOR HOUSING UPPER
(a) Using a screwdriver,release the 4 claws and remove the position indicator housing upper from the position indicator housing loweh.
18. REMOVE POSITION INDICATOR SLIDE COVER
(a) Remove the position indicator slide cover from the position indicator housing lower.
(b) Remove the position indicator light guide from the position indicator lower.
19. REMOVE POSITION INDICATOR SLIDE COVER
(a) Remove the position indicator slide cover No.2 from the position indicator slide cover.
20. REMOVE TRANSMISSION SHIFT MAIN SWITCH
(a) Remove the screw and transmission shift main switch from the position indicator housing lower.
21. REMOVE SHIFT LEVER KNOB SLEEVE
(a) Remove the shift lever knob sleeve from the shift lever.
22. INSTALL SHIFT LEVER KNOB SLEEVE
(a) Apply MP grease to the shown part of the shift lever knob sleeve and install it to the shift lever.
23. INSTALL TRANSMISSION SHIFT MAIN SWITCH
(a) Install the transmission shift main switch to the position indicator housing lower with the screw.
24. INSTALL POSITION INDICATOR SLIDE COVER
(a) Install the position indicator slide cover No.2 to the position indicator slide cover.
25. INSTALL POSITION INDICATOR SLIDE COVER
(a) Install the position indicator slide cover to the position indicator housing lower.
(b) Install the position indicator light guide to the position indicator housing lower.
26. INSTALL POSITION INDICATOR HOUSING UPPER
(a) Install the position indicator housing upper to the position indicator housing lower.
27. INSTALL PATTERN SELECT SWITCH ASSY NO.1
(a) Install the pattern select switch assy No. 1 to the position indicator housing lower.
HINT: Fit the claws securely.
28. INSTALL SHIFT LOCK RELEASE BUTTON
(a) Install the shift lock release button and greased spring to the position indicator housing lower.
HINT: Fit the claws securely.
29. INSTALL POSITION INDICATOR HOUSING LOWER
(a) Install the position indicator housing lower to the shift lever plate with 4 screws
30. INSTALL CONTROL POSITION INDICATOR PLATE
(a) Install the control position indicator plate to the position indicator housing lower.
HINT: Fit the claws securely.
31. INSTALL SHIFT LOCK RELEASE BUTTON COVER
(a) Install the shift lock release cover to the control position indicator plate.
32. INSTALL INDICATOR LAMP WIRE SUB-ASSY
(a) Install the indicator lamp bulb and indicator lamp cap to the indicator lamp wire.
(b) Install the indicator lamp wire to the position indicator housing lower.
33. INSTALL TRANSMISSION CONTROL SWITCH
(a) Install the transmission control switch to the shift lever knob cover No.1.
HINT: Fit the claws securely.
(b) Install the shift lever knob cover No.1 to the shift lever knob with a screw.
34. INSTALL SHIFT LEVER KNOB BUTTON
(a) Apply MP grease to the shift lever knob button and spring and install them to the shift lever knob.
35. INSTALL SHIFT LEVER KNOB COVER NO.1
(a) Install the shift lever knob cover to the shift lever.
36. INSTALL SHIFT LEVER KNOB SUB-ASSY
(a) Install the wire harness of the transmission control switch as shown in the illustration.
(b) Install the shift lever knob to the shift lever with 2 screws.
(c) Install the shift lever knob cover to shift lever knob.
(d) Install the 2 wire harnesses of the transmission control switch.
(e) Install the indicator lamp wire harness and connector as shown in the illustration.
37. INSTALL FLOOR SHIFT ASSY
(a) Install the floor shift assy to the vehicle with the 4 nuts.
Torque: 12 NVm (122 kgfVcm, 9 ftVlbf)
HINT: Tighten them in the order, A, B, C and D.
(b) Connect the 3 connectors.
38. INSTALL TRANSMISSION CONTROL CABLE ASSY
(a) Connect the floor shift transmission control cable end to the floor shift assy.
HINT: Install it with the uneven surface facing up.
39. INSPECT SHIFT LEVER POSITION (SEE PAGE40-71 )
40. ADJUST SHIFT LEVER POSITION (SEE PAGE40-71 )
Shift lever ASSY (ATM)
COMPONENTS
...
Adjustment
1. INSPECT SHIFT LEVER POSITION
(a) When shifting the shift lever to each position, make sure
that it moves smoothly, can be moderately operated and
the position indicator displays correctly.
...
More about Toyota Highlander:
On-vehicle inspection
1. INSPECT COOLER CONDENSER ASSY
(a) If a fin of the cooler condenser assy is dirty, clean it with water and
dry it with compressor air.
NOTICE:
Do not damage the fin of the condenser assy.
(b) If a fin of the condenser assy is bent, make it straight using a
screwdriver or pliers.
2. INSPEC ...
