Toyota Highlander manuals

Toyota Highlander Service Manual: On-vehicle inspection

NOTICE: In this section, the terms "cold" and "hot" refer to the temperature of the coils. "Cold"means approximately -10 C (14 F) to 50 C (122 F). "Hot" means approximately 50 C (122 F) to 100 C (212 F).

1. INSPECT IGNITION COIL ASSY (WITH IGNITER) AND PERFORM SPARK TEST

(a) Check for DTCs.

NOTICE: If a DTC is present, perform a troubleshooting in accordance with the procedure for that DTC.

(b) Check if sparks occur.

  1.  Remove the engine cover No. 1 (see page 14-24 ).
  2.  Remove the ignition coils.
  3.  Using a 16 mm (0.63 in.) plug wrench, remove the spark plugs.
  4.  Install the spark plugs to each ignition coil and connect the ignition coil connectors.
  5.  Disconnect the 4 injector connectors.
  6.  Ground the spark plugs.
  7.  Check if sparks occur at each spark plug while the engine is being cranked.

NOTICE:

If the sparks do not occur, do the following test:

INSPECT IGNITION COIL ASSY (WITH IGNITER) AND PERFORM SPARK TEST


INSPECT IGNITION COIL ASSY (WITH IGNITER) AND PERFORM SPARK TEST


  1. Using a 16 mm (0.63 in.) plug wrench, install the spark plugs.

    Torque: 19 NVm (194 kgfVcm, 14 ftVlbf)

  2.  Install the ignition coils.

    Torque: 9.0 NVm (92 kgfVcm, 80 in.Vlbf)

  3.  Install the engine cover No. 1.

    Torque: 9.0 NVm (92 kgfVcm, 80 in.Vlbf)

Ignition system (2AZ-FE)
...

Inspection
NOTICE: In this section, the terms "cold"and "hot" refer to the temperature of the coils. "Cold" means approximately -10 C (14 F) to 50 C (122 F). "Hot" means approximately 50 C (122 F) to 100 C ...

More about Toyota Highlander:

Folding down the third seats
Before folding down the third seats Stow the third seat belt buckles. Pass the outer seat belts through the seat belt hangers and secure the seat belt plates. This prevents the shoulder belts from being damaged. Make sure that the seat belts are removed from the hangers ...

В© 2011-2024 Copyright www.tohighlander.com