1. INSPECT INTAKE AIR CONTROL SYSTEM
(a) Using a 3-way connector, connect a vacuum gauge to the actuator hose.
(b) Connect the hand-held tester to the DLC3.
(c) Start the engine.
(d) On the hand-held tester, enter the ACTIVE TEST mode.
Standard:
Brake fluid
BLEEDING
HINT:
If any work is performed on the brake system or if air in the brake lines is
suspected, bleed the air out of the
brake system.
NOTICE:
Wash brake fluid off immediately if it adheres to any painted surface.
1. FILL RESERVOIR WITH BRAKE FLUID
Fluid: SAE J1703 or FMVSS No. ...