REPLACEMENT
1. REMOVE INTAKE AIR CONTROL VALVE ASSY NO.2
(a) Remove the 3 bolts and nut.
(b) Turn the lever to the closed position as shown in the illustration and pull out the IAC valve.
(c) Remove the gasket from the intake air surge tank.
2. INSTALL INTAKE AIR CONTROL VALVE ASSY NO.2
(a) Install a new gasket to the intake air surge tank.
(b) Install the IAC valve with the 3 bolts and nut.
Torque: 10 NVm (102 kgfVcm, 7 ftVlbf)
Airbag sensor front LH
COMPONENTS
REPLACEMENT
HINT:
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
Installation is in the reverse order of removal.
1. PRECAUTION (SEE PAGE 60-1 )
2. DISCONNECT BATTERY NEGATIVE TERMINAL (SEE PAGE 60-1 )
3. REMOVE FRONT ...