Follow the child restraint system manufacturer’s instructions.
Firmly secure child restraints to the seats using the latch anchors or a seat belt. Attach the top tether strap when installing a child restraint.
The lap/shoulder belt can be used if your child restraint system is not compatible with the latch (lower anchors and tethers for children) system.
Child restraint latch anchors
Latch anchors are provided for the outboard second seats. (Buttons displaying the location of the anchors are attached to the seats.)
Latch anchors are provided for both second seats. (Buttons displaying the location of the anchors are attached to the seats.)
Seat belts equipped with a child restraint locking mechanism (alr/elr belts except driver's seat belt)
Anchor brackets (for top tether strap)
An anchor bracket is provided for each second seat.
An anchor bracket is provided for both second seats.
An anchor bracket is provided for the third center seat.
On-vehicle inspection
1. INSPECT AIR-FUEL RATIO COMPENSATION SYSTEM
(a) Measure the voltage between the terminals of the ECM
connectors.
Standard:
NOTICE:
Connect test leads to the connector's backside. The connectors
should not be disconnected from the ECM.
HINT:
Voltage between the terminals of the EC ...