1. INSPECT DEFOGGER RELAY
(a) Inspect the defogger relay (Marking: DEF) continuity
If the continuity is not as specified, replace the relay.
2. INSPECT AIR CONDITONER CONTROL ASSY (SEE PAGE 55-7 )
3. INSPECT BACK WINDOW (DEFOGGER WIRE)
NOTICE:
(a) Turn the ignition switch ON.
(b) Turn the defogger switch ON.
(c) Check the voltage at the center of each defogger wire, as shown in the illustration.
Standard:
HINT: If there is approx 10 V, the wire may be broken between the center of the wire and the end on the battery side. If there is no voltage, the wire may be broken between the center of the wire and the end on the ground side.
(d) Place the voltmeter positive (+) lead against the defogger wire on the battery side.
(e) Place the voltmeter negative (-) lead with the foil strip against the wire on the ground side.
(f) Slide the positive (+) lead from the battery side to the ground side.
(g) The point where the voltmeter deflects from approx 10 V to 0 V is the place where the defogger wire is broken.
HINT: If the defogger wire is not broken, the voltmeter indicates 0 V at the positive (+) end of the defogger wire but gradually increases to approx 12 V as the meter probe moves to the other end.
(h) If necessary, repair the defogger wire.
4817).
NOTICE: Do not repair the defogger wire again for at least 24 hours.
Unlocking and locking the doors from the inside
Door lock switch
Locks all the doors
Unlocks all the doors
Inside lock buttons
Locks the doors
Unlocks the doors
The front doors can be opened
by pulling the inside handle
even if the lock buttons are in
the lock position.
...