Toyota Highlander Service Manual: Inspection
1. INSPECT WATER PUMP ASSY
(a) Visually check the drain hole for coolant leakage.
(b) Turn the pulley, and check that the water pump bearing moves smoothly and noiselessly.
If the bearing moves roughly or noisily, replace the water pump assy.
(c) Visually check the air holes for coolant leakage.
If leakage is found, replace the water pump assy.
if engine coolant has leaked onto the timing belt, replace the timing belt.
Replacement
1. DRAIN ENGINE COOLANT (See page 16-26 )
2. REMOVE FRONT WHEEL RH
3. REMOVE FRONT FENDER APRON SEAL RH
4. REMOVE V BELT NO. 1 (See page 14-125 )
5. REMOVE VANE PUMP V BELT (See page 14-125 )
6. ...
Thermostat (3MZ-FE)
REPLACEMENT
HINT:
The installation procedures are the removal procedures in reverse order.
However, only installation procedures
requiring additional information are included.
1. DRAIN ENGINE CO ...
More about Toyota Highlander:
Initialization
The following items must be initialized for normal system operation
after such cases as the battery being reconnected, or maintenance
being performed on the vehicle:
Item
When to initialize
Power back door*
After reconnecting or changing
the battery
...
В© 2011-2024 Copyright www.tohighlander.com
