The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle:
Item |
When to initialize |
Power back door* |
|
Maintenance data (u.S.A. Only) | After the maintenance is performed |
Tire pressure warning system | When changing the tire inflation pressure by changing traveling speed or load weight, etc. |
*: If equipped
Turning the high beam on/off manually
Switching to low beam
Pull the lever to the original
position.
The automatic high beam indicator
will turn off.
Push the lever away from you to
activate the automatic high
beam system again.
Switching to high beam
Press the automatic high
beam switch.
The automatic high beam ind ...