Toyota Highlander manuals

Toyota Highlander Owners Manual: Hood

Release the lock from the inside of the vehicle to open the hood.

  1. Pull the hood lock release lever.

    The hood will pop up slightly.

Toyota Highlander. Hood


  1. Pull up the auxiliary catch lever and lift the hood.

Toyota Highlander. Hood


  1. Hold the hood open by inserting the support rod into the slot.

Toyota Highlander. Hood


Warning


Pre-driving check

Check that the hood is fully closed and locked.

If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury.

After installing the support rod into the slot

Make sure the rod supports the hood securely preventing it from falling down onto your head or body.

 

Notice


When closing the hood

Be sure to return the support rod to its clip before closing the hood. Closing the hood with the support rod not clipped could cause the hood to bend.

Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the correct procedure as given in these sections. Items Parts and tools Battery condition Warm water ...

Positioning a floor jack
When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack correctly. ...

More about Toyota Highlander:

Oil pump seal (3MZ-FE)
REPLACEMENT 1. REMOVE FR WIPER ARM LH (See page 66-7 ) 2. REMOVE FR WIPER ARM RH (See page 66-7 ) 3. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSY (See page 66-7 ) 4. REMOVE WINDSHIELD WIPER LINK ASSY (See page 66-7 ) 5. REMOVE COWL PANEL SUB-ASSY 6. REMOVE FRONT WHEEL RH 7. REMOVE ENGINE UNDER ...

В© 2011-2024 Copyright www.tohighlander.com