REPLACEMENT
HINT:
1. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSY (SEE PAGE 75-6 )
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH (SEE PAGE 75-6 )
3. REMOVE DOOR PULL HANDLE (SEE PAGE 75-6 )
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH (SEE PAGE 75-6 )
5. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSY LH (SEE PAGE 75-6 )
6. REMOVE FRONT NO.1 SPEAKER ASSY
(a) Disconnect the connector.
(b) Remove the 3 screws and front No. 1 speaker assy.
7. INSTALL FRONT NO.1 SPEAKER ASSY
(a) Install the front No.1 speaker assy with the 3 screws.
(b) Connect the connector.
Positioning a floor jack
When using a floor jack, follow the instructions in the manual
provided with the jack and perform the operation safely.
When raising your vehicle with a floor jack, position the jack correctly.
Improper placement may damage your vehicle or cause
injury.
Front
Rear
...