Toyota Highlander Owners Manual: Emission inspection and maintenance (i/m) programs
Some states have vehicle emission inspection programs which include obd (on board diagnostics) checks. The obd system monitors the operation of the emission control system.
If the malfunction indicator lamp comes on
The obd system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the i/m test and may need to be repaired. Contact your toyota dealer to service the vehicle.
Your vehicle may not pass the i/m test in the following situations:
- When the battery is disconnected or discharged
readiness codes that are set during ordinary driving are erased.
Also, depending on your driving habits, the readiness codes may not be completely set.
- When the fuel tank cap is loose the malfunction indicator lamp comes on indicating a temporary malfunction and your vehicle may not pass the i/m test.
When the malfunction indicator lamp still remains on after several driving trips
The error code in the obd system will not be cleared unless the vehicle is driven 40 or more times.
If your vehicle does not pass the i/m test
Contact your toyota dealer to prepare the vehicle for re-testing.
General maintenance
Listed below are the general maintenance items that should be
performed at the intervals specified in the “owner’s warranty
information booklet” or “owner’s manual supplement/scheduled
ma ...
More about Toyota Highlander:
Front differential oil seal (U241E)
REPLACEMENT
1. REMOVE FRONT WHEELS
2. REMOVE ENGINE UNDER COVER NO.1
3. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug, gasket and drain ATF.
(b) Install a new gasket and drain plug.
Torque: 49 NVm (500 kgfVcm, 36 ftVlbf)
4. REMOVE FRONT DRIVE SHAFT ASSY RH (SEE PAGE 30-21 )
5. ...
