Toyota Highlander Service Manual: Cooling system (3MZ-FE)
1. REMOVE DRAIN PLUG
(a) Remove the drain plug.
(b) Remove the O-ring.
2. ASSEMBLE SST
SST 09230-01010
(a) Install the claw to the overhaul handle, inserting it in the
hole in part A as show ...
1. INSPECT COOLING SYSTEM FOR LEAKS
(a) Remove the radiator cap.
CAUTION:
Do not remove the radiator cap while the engine and radiator
are still hot. Pressurized, hot engine coolant and steam
...
More about Toyota Highlander:
Pcs
(pre-collision system)
When the radar sensor detects that a frontal collision is highly
likely or even unavoidable, safety systems such as the brakes
and seat belts are automatically engaged to lessen impact as
well as vehicle damage.
The pre-collision system can be turned on and off as necessary by
operating the s ...
В© 2011-2024 Copyright www.tohighlander.com