Toyota Highlander Service Manual: Charging system (3MZ-FE)

Overhaul

1. REMOVE MAGNETIC SWITCH ASSY (a) Remove the nut and disconnect the lead wire from the magnetic switch. (b) Remove the 2 screws holding the magnetic switch to the starter drive housing. ...

Precaution

CAUTION: Check that the battery cables are connected to the correct terminals. Disconnect the battery cables when the battery is given a quick charge. Do not perform tests with a high volta ...

More about Toyota Highlander:

Driving in vehicle-to-vehicle distance control mode
This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 M) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suitable following distance from the vehicle ahead. Note that vehicle-to-vehicle distance will ...