Toyota Highlander manuals

Toyota Highlander Service Manual: Antenna cord sub-ASSY NO.3

REPLACEMENT

HINT:

1. REMOVE ROOF HEADLINING ASSY (SEE PAGE 76-21 )

HINT: Refer to the procedures up to "REMOVE ROOF HEAD LINING ASSY".

2. REMOVE ANTENNA CORD SUB-ASSY NO.3

(a) Remove the antenna cord sub assy No. 3 from the roof headlining.

3. INSTALL ANTENNA CORD SUB-ASSY NO.3

(a) Tape the antenna cord sub-assy No. 3 at the position of the roof headlining shown in the illustration.

NOTICE: The antenna cord sub assy should come to the center of the tape (100 mm x 25 mm) when taped.

Try not to touch the adhesive side of the tape when taping.

INSTALL ANTENNA CORD SUB-ASSY NO.3


4. INSTALL ROOF HEADLINING ASSY (SEE PAGE 76-21 )

HINT: Refer to the procedures from "INSTALL ROOF HEAD LINING ASSY".

Antenna cord sub-ASSY NO.2
REPLACEMENT HINT: COMPONENTS: See page 67-2 Installation is in the reverse order of removal. 1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY W/PASSENGER AIR BAG ASSY (SEE PAGE 71-10 ) HINT: ...

Amplifier antenna ASSY
REPLACEMENT HINT: COMPONENTS: See page 76-21 Installation is in the reverse order of removal. 1. REMOVE ROOF HEADLINING ASSY (SEE PAGE 76-21 ) HINT: Refer to the procedures up to "REMOVE R ...

More about Toyota Highlander:

Cooler compressor ASSY (3MZ-FE)
COMPONENTS REPLACEMENT HINT: COMPONENTS: see page 55-51 1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM (SEE PAGE 55-17 ) SST 07110-58060 (07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080) 2. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 (SEE ...

В© 2011-2024 Copyright www.tohighlander.com