Toyota Highlander Owners Manual: Windshield wipers and washer

Operating the wiper lever

The wiper operation is selected by moving the lever as follows.

1. *1 Or
   *2 Intermittent windshield
   wiper operation
2. *1 Or
   *2 Low speed windshield
   wiper operation
3. *1 Or
   *2 High speed windshield
   wiper operation
4. *1 Or
   *2 V

*1: For u.S.A.

*2: For canada

Wiper intervals can be adjusted when intermittent operation is selected.

4. Increases the intermittent windshield wiper frequency
5. decreases the intermittent windshield wiper frequency

7. Washer/wiper dual operation

Wipers will automatically operate a couple of times after the washer squirts.

The windshield wiper and washer can be operated when

• Vehicles without a smart key system the engine switch is in the "on" position.
• vehicles with a smart key system the engine switch is in ignition on mode.

If no windshield washer fluid sprays

Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir.

Warning Caution regarding the use of washer fluid When it is cold, do not use the washer fluid until the windshield becomes warm. The fluid may freeze on the windshield and cause low visibility. This may lead to an accident, resulting in death or serious injury.

Notice ?When the windshield is dry Do not use the wipers, as they may damage the windshield. When the washer fluid tank is empty Do not operate the switch continually as the washer fluid pump may overheat. When a nozzle becomes blocked In this case, contact your toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.

© 2011-2024 Copyright www.tohighlander.com