Toyota Highlander Owners Manual: Radiator and condenser

Toyota Highlander Owners Manual / Maintenance and care / Do-it-yourself maintenance / Engine compartment / Radiator and condenser

Check the radiator and condenser and clear away any foreign objects.

If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your toyota dealer.

Warning

When the engine is hot

Do not touch the radiator or condenser as they may be hot and cause serious injuries, such as burns.

Engine coolant

The coolant level is satisfactory if it is between the “full” and “low” lines on the reservoir when the engine is cold. Reservoir cap “full” line “low” line If the leve ...

Brake fluid

Checking fluid level The brake fluid level should be between the “max” and “min” lines on the tank. Adding fluid Make sure to check the fluid type and prepare the necessary item. ...

More about Toyota Highlander:

Overhaul
1. REMOVE GENERATOR PULLEY SST 09820-63010 (09820-06010, 09820-06020) HINT: (a) Hold SST (1-A) with a torque wrench, and tighten SST (1-B) clockwise to the specified torque. Torque: 39 NVm (400 kgfVcm, 29 ftVlbf) NOTICE: Check that SST is secured to the rotor shaft. (b) Mount S ...