Toyota Highlander Service Manual: Oil W/hose cooler ASSY (U241E/U140F)
REPLACEMENT
1. REMOVE RADIATOR GRILLE (See page 76-2 )
2. REMOVE FRONT BUMPER COVER (See page 76-2 )
3. SEPARATE OIL COOLER OUTLET TUBE NO.1
(a) Loosen the clip and separate the oil cooler hose.
4. SEPARATE TRANSMISSION OIL COOLER HOSE NO.1
(a) Loosen the clip and separate the transmission oil cooler hose No. 1.
5. REMOVE OIL W/HOSE COOLER ASSY
(a) Remove the bolt, nut and oil cooler assy.
6. INSTALL OIL W/HOSE COOLER ASSY
(a) Install the oil cooler assy, bolt A and nut B.
HINT: After temporally tightening bolt A, tighten in order of nut B, bolt A.
Torque: 7.0 NVm (71 kgfVcm, 62 in.Vlbf)
7. INSTALL TRANSMISSION OIL COOLER HOSE NO.1
(a) Install the transmission oil cooler hose No. 1 and clip.
8. INSTALL OIL COOLER OUTLET TUBE NO.1
(a) Install the oil cooler hose and clip.
9. ADD AUTOMATIC TRANSAXLE FLUID
10. INSPECT AUTOMATIC TRANSAXLE FLUID (See page 40-2 )
Transmission valve body ASSY (U151E/U151F)
REPLACEMENT
1. REMOVE ENGINE UNDER COVER NO.1
2. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug and gasket, and drain ATF.
(b) Install a new gasket and the drain plug.
Torque: 49 NVm ...
Oil W/hose cooler ASSY (U151E/U151F)
REPLACEMENT
1. REMOVE FRONT BUMPER COVER (SEE PAGE 76-2 )
2. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the drain plug and gasket, and drain ATF.
(b) Install a new gasket and the drain plug.
To ...
More about Toyota Highlander:
Brake fluid
BLEEDING
HINT:
If any work is performed on the brake system or if air in the brake lines is
suspected, bleed the air out of the
brake system.
NOTICE:
Wash brake fluid off immediately if it adheres to any painted surface.
1. FILL RESERVOIR WITH BRAKE FLUID
Fluid: SAE J1703 or FMVSS No. ...
