Toyota Highlander Owners Manual: Activating the automatic high beam system
Toyota Highlander Owners Manual / Driving / Operating the lights and
wipers / Automatic high beam / Activating the automatic high beam system
- Push the lever away from you
with the headlight switch in the
or
position.
- Press the automatic high beam switch.
The automatic high beam indicator will come on when the headlights are turned on automatically to indicate that the system is active.
Automatic high beam
The automatic high beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of oncoming and
preceding vehicles, etc., And automatically turns the high beam
on or o ...
High beam automatic turning on or off conditions
When all of the following conditions are met, the high beam will be
automatically turned on (after approximately 1 second):
vehicle speed is above approximately 21 mph (34 km/h).
Th ...
More about Toyota Highlander:
Camshaft position sensor (2AZ-FE)
REPLACEMENT
HINT:
A bolt without a torque specification is shown in the standard bolt chart (see
page 03-2 ).
1. REMOVE AIR CLEANER ASSY (See page 14-24 )
2. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.
3. INSTALL CAMSHAFT POSITION ...
В© 2011-2024 Copyright www.tohighlander.com
